Answers are grounded in this paper and cite their sources.
Demonstrates scalable fiber production in piezoelectric applications, highlighting improved manufacturing efficiency.
The thermal drawing process (TDP) offers a promising route for fabricating long functional fibers from macroscopic multimaterial preforms; however, its potential is currently restricted by two critical bottlenecks: the difficulty in integrating highly conductive, flexible electrodes and the processing constraints imposed by conventional shear-based rheological assessments. Because such assessments cannot capture tensile rupture behavior, semi-crystalline polymers typically require a cladding material that stabilizes the drawing process but limits scalability. Here, we overcome these limitations by introducing a highly conductive silver nanowire (AgNW)-coated polymeric core electrode and a thermal elongation (TE) test that directly evaluates extensional deformation across diverse material systems. Guided by the TE test, we demonstrate cladding-free thermal drawing of a semi-crystalline polyvinylidene fluoride (PVDF) homopolymer, with synchronous feeding of the AgNW-coated nylon core (17 Ω/cm). Eliminating the cladding enables a seamless, continuous post-treatment workflow, including in situ corona discharge poling. The resulting piezoelectric coaxial fiber exhibits a remarkably high peak-to-peak output voltage of 9.4 V under 0.5% tensile strain and demonstrates exceptional mechanical durability, retaining 87.3% of its initial signal after 10,000 bending cycles at a 1 mm radius. All processes are fully integrated into a reel-to-reel system, establishing a scalable pathway toward mass production of flexible piezoelectric fibers for wearable sensing applications.
No takes yet. Share an insight, caveat, or question.
Lee et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: