Temperature Response Following Nontraumatic Low Power Radiofrequency Application

A marker for the efficiency of heating would be helpful in radiofrequency ablation of tachyarrhythmias. We hypothesized that changes of the catheter tip temperature during nontraumatic, very low power radiofrequency exposure would correlate with the temperature achieved during radiofrequency ablation, and therefore, could be used as a marker for heating efficiency. In 71 ablation attempts for drug refractory supraventricular tachycardias, the catheter tip temperature response to a 1-W-5-second test pulse was measured. Subsequently at the same site, radiofrequency current was delivered with a target temperature of 70 degrees C and a power limit of 50 W. The test pulse, with a measured power level of 1.62 +/- 0.28 W, resulted in a heating efficiency of 0.78 +/- 0.60 degree C/W. During ablation, the achieved tip temperature was 52.9 +/- 7.5 degrees C, requiring a power output of 40.7 +/- 10.9 W. The heating efficiency was 0.57 +/- 0.74 degree C/W. The correlation between heating efficiency at low power and during radiofrequency ablation was linear with a correlation coefficient of 0.88. Regression analysis demonstrated that a heating efficiency above 1 degree C/W predicts a mean ablation temperature above 50 degrees C with more than 95% confidence interval. The temperature response to a very low power radiofrequency application correlates with the temperature rise achieved during radiofrequency ablation. It is suggested that delivery of low power radiofrequency current could be used to determine and monitor efficiency of heating during catheter mapping and ablation procedures.