Answers are grounded in this paper and cite their sources.
The ability to promptly assess structural performance following seismic events is essential for mitigating disruptions to urban functions and minimizing secondary damage. Conventional structural health monitoring (SHM) systems primarily rely on accelerometer-based measurements, which limit their ability to identify damage at the structural component level. To address this limitation, a novel low-cost monitoring method incorporating multi-point strain and acceleration measurements was proposed and validated through shaking table experiments. The tests were conducted on a 10-story steel-framed structure at the E-Defense facility, focusing on a single bay of the third floor instrumented with 240 strain gauges and 30 strain measurement units. A frequency-domain analysis was performed to track changes in the neutral axis of composite beam, local bending and shear stiffness of beams and columns, and the specimen’s natural frequency. The method successfully identified minor damage in the composite beam, including a 100 mm shift in the neutral axis and a 0.2 m shift of the inflection point, along with reductions in local bending and shear stiffness. Owing to minimal frequency change, these damages could not be detected using acceleration data alone. These findings underscore the importance of detailed strain measurements for detecting subtle damage and demonstrate the method’s feasibility for real-world applications. Through this shaking table experiment, it was demonstrated that multi-point dynamic strain measurement is feasible at a practical cost. The results revealed that this approach enables the detection of small damage, confirming its applicability to real buildings.
No takes yet. Share an insight, caveat, or question.
Tea et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: