Answers are grounded in this paper and cite their sources.
Membrane-electrode-assemblies (MEAs) were fabricated with electrospun nanofiber electrodes containing Johnson-Matthey (JM) HiSpec 4000 catalyst and a Nafion 212 membrane. MEA performance was evaluated in a hydrogen/air fuel cell, where power output was correlated with cathode Pt loading (0.029–0.107 mgPt/cm2) and changes in fuel cell temperature (60°C and 80°C), pressure (up to 3.0 atm), and feed gas flow rates. In all experiments, the nanofiber anode had a fixed Pt loading of 0.10 mg/cm2. The mass activity (0.16 A/mgPt at 0.9 V) and electrochemical surface area (∼41 m2/g) of nanofiber cathodes were very high and more power was generated from nanofiber electrode MEAs than from a conventional MEA with decal electrodes. Thus, the maximum power density for H2/air fuel cell operation at 80°C, 1 atm (ambient) pressure, 125 sccm H2, and 500 sccm air was 437 mW/cm2 for a nanofiber cathode at 0.065 mgPt/cm2 vs. 400 mW/cm2 for a decal MEA with cathode/anode Pt loadings of 0.104/0.40 mg/cm2. Similarly, an electrospun cathode with a Pt loading of 0.055 mg/cm2 produced a maximum power density of 906 mW/cm2 at 80°C and 3 atm pressure with 2000 sccm fully humidified air and 500 sccm H2.
No takes yet. Share an insight, caveat, or question.
Brodt et al. (2013) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: