This is the authors' abstract. We don't add key points for this paper.
Resonance frequency measurements are used for various applications: atomic force microscopes, mass detection, biochemical and inertial sensors. In this article a detailed analysis of the performances of a resonance frequency measurement method are presented and demonstrated using a space grade accelerometer. The method consists of replacing the feedback of the oscillator with a controller that drives the sensor’s input, acquires the sensor’s output, determines the phase shift between the sensor’s input and output, converts it to a resonance frequency measurement and adjusts the drive signal’s frequency. The innovative phase to frequency conversion model used ensures a fast convergence of the drive signal towards the resonance frequency. The maximum measured relative error while searching for the resonance frequency is of 0.04 [%]. The tracking of the resonance frequency shows no oscillations or overshoots because the resonance frequency is exactly measured. The achieved measurement noise floor for the specific sensor used is 0 . 13 [ m H z / H z ] at 1 H z . The measurement method presented can be exploited for other applications which also rely on the measurement of the resonance frequency of a piezo-electric resonator. • Resonance frequency measurement for space accelerometer. • Model-based phase to frequency conversion with self-initialisation. • Noise performance of resonant sensor. • Stable, overshoot-free resonance tracking. • Applicable for other sensors.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Negretto et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: