Answers are grounded in this paper and cite their sources.
A systematic and quantitative comparison of electrical detection systems in scanning microwave microscopy is reported. Scanning microwave microscopy (SMM) is capable of investigating nanoscale electrical properties with high accuracy over a broad frequency range of 1-20 GHz. However, due to the passive matching network only discrete frequencies can be used every 1 GHz with varying signal-to-noise ratio (SNR). Here we study in detail the impedance matching mechanism using an interferometric network where a two-port measurement is implemented with a reduction of the trace noise due to signal subtraction. The interferometer setup shows superior performance resulting in a 2-8 fold increased SNR with respect to the standard shunt solution, in addition to stable broadband performance over the full frequency range. We perform a comparison of the electrical sensitivity obtained using a direct connection from the network analyser to probe, the typically implemented shunt-resonator impedance matching network, and the proposed interferometer setup. The interferometer SMM allows us also for calibrated impedance measurements, which we demonstrate on Tobacco mosaic viruses with 18-nm diameter, with a capacitance resolution of 0.67 attoFarads at 10 ms acquisition time per pixel.
No takes yet. Share an insight, caveat, or question.
Tuca et al. (2017) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: