Answers are grounded in this paper and cite their sources.
Experimental investigation of HFRP-steel connections reveals optimal stud configurations for improved performance.
Fiber-reinforced polymers (FRPs) are widely used to strengthen steel structures, most commonly through adhesive bonding. However, brittle debonding at the adhesive interface can compromise the reliability and structural performance of the strengthened system. To overcome this limitation, mechanical fastening using hybrid carbon-glass fiber-reinforced polymer (HFRP) strips and non-corrosive FRP studs has been proposed as an alternative strengthening technique. This study experimentally examined thirty double-lap HFRP-steel connections to evaluate their interfacial behavior under different stud diameter and edge distance values. Two stud diameters, 10 mm and 13 mm, and five edge distances ranging from two to six times the hole diameter were considered. The results showed that edge distance had a negligible influence on the load-slip response, whereas increasing the stud diameter significantly improved the load capacity, with a 65% increase in peak load. Based on the experimental findings, the 13 mm FRP stud with an edge distance of three times the hole diameter was identified as the optimal configuration. The performance of such configuration was also compared with that of its equivalent HFRP-steel connection that uses steel bolts. Furthermore, a simplified nonlinear load-slip model was developed to represent the interfacial response of HFRP-steel connections with FRP studs. The proposed model was incorporated into ANSYS to conduct a comprehensive parametric study on the effects of stud diameter, stiffness, and spacing on connection performance.
No takes yet. Share an insight, caveat, or question.
AbouEl-Hamd et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: