Answers are grounded in this paper and cite their sources.
Evaluates tensile strength and moisture resistance in wood polymer composites, suggesting distinct influencing factors.
Chemical modification is widely used to improve compatibility in wood polymer composites (WPCs), yet its ability to simultaneously enhance mechanical performance and moisture resistance remains unclear. In this study, meranti wood fibres (Shorea spp.) were alkali-treated and graft-copolymerized with methyl methacrylate (MMA) prior to incorporation into a high-density polyethylene (HDPE) matrix. Composites containing untreated and grafted fibres at varying fibre loadings were evaluated for tensile behaviour and water absorption. Increasing fibre loading caused a systematic reduction in tensile strength due to limited stress transfer and incomplete matrix encapsulation, with HDPE unable to effectively encapsulate fibres above approximately 15 wt%. MMA grafting resulted in only marginal tensile improvements but significantly reduced water absorption, exceeding 50% after prolonged immersion. Statistical analysis confirmed that tensile behaviour was governed primarily by fibre loading, whereas moisture resistance was strongly influenced by graft copolymerization. Microstructural observations showed improved interfacial contact in grafted composites but persistent fibre pull-out as the dominant failure mode. These findings demonstrated that MMA grafting improved moisture resistance but did not proportionally enhance tensile reinforcement. This indicates that these properties are affected by different factors. Furthermore, a fibre loading limit of approximately 15 wt% was identified.
No takes yet. Share an insight, caveat, or question.
Ko et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: