Answers are grounded in this paper and cite their sources.
Functionalization is a promising approach to further exploit the potential of nanocellulose (NC) as a modifier of wood adhesives. This study investigated NC functionalized with N-[3-(trimethoxysilyl)propyl]ethylenediamine (DAMO), (3-glycidyloxypropyl)trimethoxysilane (GPTMS), and (3-mercaptopropyl)trimethoxysilane (MPTMS) and its effects on urea-formaldehyde (UF) adhesive and particleboard properties. Successful functionalization of NC was confirmed by Fourier transform infrared spectroscopy and energy-dispersive X-ray spectroscopy. The contact angle measurements indicated partial hydrophobization of the NC surface. Markedly, MPTMS showed the highest functionalization efficiency among the investigated silanes. Unmodified NC increased adhesive viscosity, but this effect was reduced by silanization. Functionalized NC also improved the curing behaviour of the UF adhesive, with the greatest effect observed for MPTMS-modified variant. The addition of NC improved the mechanical properties of particleboards, and functionalization further enhanced this effect. MPTMS provided the greatest improvement in internal bond, bending strength, and modulus of elasticity and was the only modifier that significantly reduced thickness swelling. None of the modifications significantly affected water absorption. Functionalization with DAMO considerably reduced both formaldehyde content and emission. Overall, MPTMS was the most effective silane for improving mechanical performance and dimensional stability, while DAMO showed the highest effectiveness in reducing formaldehyde emission.
No takes yet. Share an insight, caveat, or question.
Kawalerczyk et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: