Answers are grounded in this paper and cite their sources.
Experimental investigation demonstrates how pH and temperature influence calcium phosphate phase and properties, highlighting their controllability.
A series of calcium phosphates synthesized through a wet precipitation route of hydroxylapatite (HAP) was investigated over a wide range of temperature and pH (25-80 degrees C, and pH 6.5-10.0) using a combination of microscopic and spectroscopic analyses. XRD and FTIR show that monetite and brushite are formed as a single phase at non-ideal conditions of HAP, respectively. From TGA results, it is found that brushite is converted to monetite at a range 175-200 degrees C when heated at the heating rate, 10 degrees C/min. This phase transformation is also observed when brushite is aged at pH 8.5 and 60 degrees C for 24 hr in solution. Morphology of brushite is sensitive to pH variation. At pH 6.5, tabular and platy crystals of brushite are observed whereas needle-like ones are predominant at pH 8.5. For HAP formed at pH 10.0, their shapes tend toward needle-like particles as temperature increases. HAP particles at pH 8.5 are very similar in morphology to HAP at pH 10.0, but their lengths are two or three times as great as those at pH 10.0. These observations demonstrate that desired phase and properties of calcium phosphates can be controlled by pH, temperature, and aging time through a wet precipitation method.
No takes yet. Share an insight, caveat, or question.
Kim et al. (2015) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: