Answers are grounded in this paper and cite their sources.
In primary aluminum production, anode sticking is a recurrent problem in carbon anode baking, characterized by adhesion of adjacent anodes or sticking of packing coke to anode surfaces. One explanation involves local variation in the efficiency of volatile extraction, where increased volatile residence time and partial pressure in the packing coke might promote their condensation. This study investigates the influence of volatile partial pressure on condensation behavior within a coke bed during pitch pyrolysis. Nitrogen was injected into a closed system at controlled flow rates to regulate volatile partial pressure. Gas composition was measured using Micro-GC, while the processed coke was evaluated through visual inspection, physical characterization, and surface chemical analysis. Results showed severe coke sticking, substantial mass gain from condensed volatiles, and the lowest pycnometer and real densities under high volatile partial pressure. Thick deposits of condensed volatiles were observed within coke pores, with their thickness decreasing as volatile partial pressure decreased. Baking experiments on cored anodes using different chamber sizes and packing coke permeabilities further confirmed the direct role of volatile partial pressure in anode sticking. These findings demonstrate that volatile partial pressure governs volatile condensation and constitute a key mechanism contributing to anode sticking.
No takes yet. Share an insight, caveat, or question.
Shadvar et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: