Answers are grounded in this paper and cite their sources.
Introduction The rollout of 6G wireless systems demands compact, frequency-agile antennas capable of operating across multiple millimeter-wave bands to support diverse use cases such as wearable modules, reconfigurable intelligent surfaces, and small-cell infrastructure. Conventional fixed-band antennas struggle to meet these multi-band requirements without increasing device footprint or complexity, motivating the need for reconfigurable architectures that can dynamically switch between frequency states while maintaining high gain and efficiency on a low-loss, flexible substrate suited to sub-terahertz operation. Methods A quad-band frequency-reconfigurable slot antenna was designed on a liquid crystal polymer substrate, incorporating four RF MEMS cantilever switches loaded across a complementary split-ring slot resonator. Five independent switching states were defined to control current-path routing across the resonator, enabling discrete reconfiguration among four millimeter-wave bands spanning 26.5–27.8, 37.2–38.6, 47.4–48.9, and 55.1–57.3 GHz. Full-wave electromagnetic simulations were used to characterize gain, return loss, and radiation efficiency for each switching configuration, and results were validated against experimental measurements. A machine learning surrogate model was additionally trained on physics-informed synthetic data to predict S-parameters and gain, intended to reduce the computational burden of iterative full-wave simulation during early-stage design. Results The proposed antenna achieved realized gains of 8.74–12.86 dBi across all four bands, with return loss consistently exceeding 15 dB and radiation efficiency above 86% in every configuration. Simulated and measured results showed close agreement, with a mean absolute error of 0.41 dB and a maximum gain deviation of 0.44 dBi. The antenna's area-normalized gain efficiency exceeded that of contemporary reconfigurable designs evaluated for comparison. The machine learning surrogate model predicted S-parameters and gain with a mean absolute error below 0.5 dB. Discussion The strong agreement between simulated and measured performance, combined with the antenna's compact footprint and high gain-to-area ratio, supports its viability for 6G applications requiring multi-band agility within tight space constraints, including wearable modules, reconfigurable intelligent surfaces, and small-cell infrastructure. The accuracy of the physics-informed ML surrogate model further suggests a practical pathway for accelerating iterative antenna design by reducing reliance on computationally intensive full-wave simulations, offering a complementary tool for rapid performance estimation in early design stages.
No takes yet. Share an insight, caveat, or question.
Wekalao et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: