Answers are grounded in this paper and cite their sources.
Year-round evaluation of solar systems shows varied performance in a cold-climate office building, indicating tailored designs may be needed.
The practical performance of building-integrated solar systems in cold climates is strongly governed by temperature-grade matching between solar energy output and space-heating demand. However, year-round field evidence comparing solar thermal collectors, photovoltaic systems, and photovoltaic/thermal systems under the same building, climatic, and heating-network boundary conditions remains limited. This study conducted a year-round field evaluation of solar collector (SC), photovoltaic (PV), and photovoltaic/thermal (PVT) systems installed in an office building in Tianjin, China. Continuous operating data collected from November 2022 to October 2023 were used to assess seasonal thermal output, electricity generation, effective heat supply, solar utilization efficiency, carbon reduction, and payback period. During the heating season, SC exhibited the strongest direct-heating capability among the investigated systems, delivering 817.50 MJ/m2 of useful heat. In contrast, under the investigated system configuration without heat-pump assistance, the outlet temperature of the PVT subsystem remained below the 45 °C direct-heating threshold, and its thermal output could not be directly utilized for winter space heating. This result is specific to the investigated operating conditions and does not exclude the potential application of PVT systems coupled with heat pumps or low-temperature heating terminals. During the non-heating season, the investigated PVT subsystem simultaneously produced electricity and usable low-temperature heat, with heat and electricity accounting for 61.3% and 38.7% of its useful output, respectively, indicating its potential for combined energy harvesting. Under the investigated climatic, system, cost, and energy-demand conditions, the entropy-weighted TOPSIS assessment ranked SC highest when non-heating-season heat demand was present, whereas PV was more suitable when such heat demand was absent. Furthermore, a demand–output matching method was developed to support SC/PV area allocation for different building types. Under the investigated climatic and energy-demand assumptions, the recommended PV area ratios were 54.5%, 67.4%, and 79.7% for residential, office, and commercial buildings, respectively. These results provide field evidence for effective heat evaluation, temperature-grade matching, and component selection in solar-assisted heating systems for cold-climate buildings.
No takes yet. Share an insight, caveat, or question.
Hong et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: