Answers are grounded in this paper and cite their sources.
Numerical investigation demonstrates how gap distance influences shock transmission in a protective composite armor system.
Shock wave propagation in a layered ceramic–polymer–metal (CPM) composite armor was investigated numerically using the Abaqus© (2024) software in a plate-impact configuration, in which a copper impactor impacts a CPM plate that serves as an intermediate layer between the impactor and a protected target representing human bone. The resulting motion of the CPM back surface closes a pre-calibrated gap, initiating a secondary impact on the protected target. Because the transmitted loadings depend on the complex interaction of compressive and release waves within the layered system, the effect of gap distance on impact response is difficult to predict. Therefore, the primary objective of this study is to develop an improved understanding of the shock-mitigation mechanisms within the CPM system that enable the target to survive the impact event. The particle-velocity history at the midplane of the protected target was used to compare responses at different gap distances. The gap effect is influenced by geometry under uniaxial strain conditions, as well as by the materials’ wave speed and shock impedance. The observed trends arise from the combined effects of geometry under uniaxial strain conditions, material wave speed, and shock impedance mismatch, which govern the evolution and interaction of the compressive and release waves at different gap distances. The CPM configuration was examined over a 1–10 mm gap, and a detailed analysis was conducted for the representative gap distances of 1–3 mm. The results indicate that the midplane velocity of the protected target depends strongly on the gap distance, with a 1 mm gap producing the highest midplane velocity, followed by gaps of 3 mm and 2 mm. The CPM response depends on differences in the timing and strength of compressive and release waves reaching its free surface before gap closure, as shown by velocity histories and x–t diagrams.
No takes yet. Share an insight, caveat, or question.
Panthee et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: