Answers are grounded in this paper and cite their sources.
Investigates separation efficiency in an oligomer separator using computational fluid dynamics, suggesting improvements through inlet design.
The high‐pressure polyethylene/ethylene vinyl acetate copolymer (EVA) production process generates a small amount of oligomers, making it necessary to instal an additional oligomer separator downstream of the product separator. This prevents oligomer accumulation from clogging pipelines and damaging the secondary compressor in the high‐pressure recirculation system. This study investigates the gas–liquid two‐phase flow within a high‐pressure polyethylene/EVA oligomer separator with horizontal eccentric inlets at half cylinder height. Computational fluid dynamics techniques were employed, utilizing the Reynolds stress model and discrete phase model to analyze the flow dynamics within the separator. The results show that a pronounced rotating flow field is established within the high‐pressure polyethylene/EVA oligomer separator. Separation is achieved through a combination of centrifugal action and gravitational settling. The central region of the separator exhibits a high upward gas velocity, whereas the peripheral region maintains a very low upward gas velocity. Under centrifugal forces, oligomer droplets are driven toward the peripheral low‐upward velocity region, where they can effectively settle under gravity, thereby enhancing separation efficiency. Increasing inlet eccentricity further strengthens the centrifugal field and improves separation performance. Moreover, the dual‐inlet configuration improves flow symmetry and vortex stability, resulting in significantly higher separation efficiency.
No takes yet. Share an insight, caveat, or question.
Gao et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: