Answers are grounded in this paper and cite their sources.
Analyzes heat and mass transfer in metallic fins, suggesting design improvements for cooling systems.
The major novelty of the present work is the semi‐analytical investigation of fully wet aluminium and copper porous dovetail fin under dehumidification condition, which has not been studied previously. To address this gap, the present study analyses the comparative temperature distribution and efficiency characteristics of longitudinal porous dovetail fin made of aluminium () and copper (). The heat transfer in the porous structure is modeled using Darcy's law and the resulting nonlinear dimensionless equation is solved using the Differential Transformation Method (DTM). The obtained results are validated with existing literature, confirming the reliability of the present solution. Copper fin exhibits better temperature distribution and efficiency than aluminium fin with a temperature rises of 138.47% for and 209.87% for indicating better heat retention in copper and larger temperature variation in aluminium. Increasing relative humidity () by 66.66% reduces the temperature distribution by 136.31% for and 84.06% for due to stronger condensation‐driven cooling and higher moisture load. Further, as the tapering effect () increases by 200%, the temperature profile rises by 16.73% for and 11.31% for , confirming that stronger dovetail tapering improves conductive heat transport along the fin. The present study gives useful design insight for compact dehumidification‐based cooling systems using metallic porous dovetail fin.
No takes yet. Share an insight, caveat, or question.
Kumar et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: