Answers are grounded in this paper and cite their sources.
Investigates failure mechanisms in nitrile butadiene rubber seals, suggesting safety improvements for hydrogen systems.
As critical sealing components for hydrogen energy infrastructure, nitrile butadiene rubber (NBR) O‐rings are prone to rapid decompression‐induced failure in high‐pressure hydrogen service, threatening system safety and integrity. To elucidate the failure mechanism, a coupled hydrogen diffusion‐deformation model was established to simulate the mechanical response of silica‐filled NBR composite seals with cavity defects under 20 MPa hydrogen pressure. The results indicate that the higher the hydrogen pressure, the more significant the pressure difference between the inside and outside of the cavity and the peak strain during decompression; higher decompression rates directly increase crack initiation and propagation risks, serving as the dominant trigger for seal failure. The pre‐compression ratio affects decompression strain only by altering the initial mechanical deformation, with no significant influence on hydrogen diffusion. A critical decompression rate is defined to distinguish pressurization‐dominated and decompression‐dominated strain stages, providing a quantitative threshold for identifying high/low‐risk decompression. Higher pre‐compression ratios render the sealing system more susceptible to entering the high‐risk regime. This study clarifies the strain evolution and failure mechanism of NBR O‐rings during rapid decompression, offering a theoretical basis for anti‐failure design, operational optimization, and safety evaluation of rubber sealing structures in hydrogen infrastructure.
No takes yet. Share an insight, caveat, or question.
Zhou et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: