Answers are grounded in this paper and cite their sources.
The Cu−ZnO/SiO 2 sorbent for ultradeep adsorptive removal of H 2 S from the reformate streams at room temperature was prepared and tested, and characterization of the active sites was performed. The Cu dopant significantly enhances desulfurization capacity of ZnO/SiO 2 sorbent at room temperature (up to 92% utilization of ZnO), and the sorbent maintains a high sulfur uptake capacity upon multiple cycles (up to 10) of regeneration by a simple thermal oxidation in air. The “as-prepared” (“calcined”) sorbent contains Cu in the Cu 2+ form, O, Si, and Zn as ZnO, while the “spent” (“sulfided”) sorbent contains Cu, O, Si, S, and Zn as the ZnS form, as found by XPS. XRD suggests that both zinc and copper compounds of the Cu−ZnO/SiO 2 sorbent are nanodispersed. ESR spectroscopy found that the “calcined” and “sulfided” Cu−ZnO/SiO 2 sorbents contain Cu 2+ in the single dispersion and coordination state. During H 2 S adsorption, partial reduction of Cu 2+ to Cu + occurs: the higher Cu concentration in the sorbent, the lower the reduction yield of Cu 2+ to Cu +, thus correlating with sulfur uptake capacity. The “deactivated” sorbent (10−11 adsorption/regeneration cycles) is enriched with a different chemical form of Cu 2+, compared to the “as-prepared” sorbent.
No takes yet. Share an insight, caveat, or question.
Dhage et al. (2010) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: