Answers are grounded in this paper and cite their sources.
Investigates culvert reinforcement in highway projects, suggesting effective enhancements for load capacity.
To address the insufficient bearing capacity of existing slab culverts under increased fill heights in highway widening projects, a reinforcement method integrating an additional deck slab with a grouted steel pipe pile-supported composite foundation is proposed. A segmented elastic foundation beam model is developed to derive the analytical solution for slab deflection and calculate the load acting on the culvert roof. A three-dimensional finite element model is established in Abaqus, in which the soil is modeled using the Mohr–Coulomb elastoplastic constitutive model to investigate the effects of pile arrangement, pile diameter, pile length, pile spacing, and fill height on reinforcement performance. The results show that culvert displacement and stress decrease with reduced pile spacing and increased pile diameter and pile length, while the best reinforcement performance among the investigated cases is achieved when the piles extend 4 m below the culvert base slab Field tests from the Beijing–Hong Kong–Macao Expressway widening project demonstrate the applicability of the proposed reinforcement method and show that pressure grouting increases the coefficient of subgrade reaction by 7–10%. Based on theoretical and field investigations, recommended reinforcement parameters are proposed for a representative culvert. The proposed method provides an efficient solution for culvert reinforcement in highway widening projects.
No takes yet. Share an insight, caveat, or question.
Jiang et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: