Answers are grounded in this paper and cite their sources.
High pressure room temperature molding of polymeric powders has been found to be a useful technique for producing parts from certain hard‐to‐process polymers and certain common polymers. Polymeric powders of less than 175μ were compacted at pressures up to 0.689 GPa. Subsequent heat treating of the compacted samples improves the mechanical properties of the samples to levels comparable to those attained by other techniques. Thermosetting or reactive polymers which do not evolve vapors during curing are readily processed by this technique. Semicrystalline polymers which are molded above their T g are also easily processed by this method. Glassy polymers, in general, have not been found to be processable. The important process variables are molding pressure, molding time and heat treating temperature and time. The process relies on particle‐to‐particle fusion by either chemical reaction or localized melt fusion. For semicrystalline polymers, the annealing temperature is within the melting endotherm. Reactive polymers cure at their optimum curing temperature.
No takes yet. Share an insight, caveat, or question.
D. M. Bigg (1977) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: