Key points are not available for this paper at this time.
In the case of operating in a weak grid system, when wind power becomes a significant portion of the power system or even the sole energy source, the wind power generators and converters are expected to help maintain the grid voltage. The grid‐side converter needs to work as a voltage source to help regulate the terminal (grid) voltage amplitude and frequency by adjusting the reactive power and active power flow, respectively. For a direct‐drive permanent magnet synchronous generator with a full power converter, the active power must be provided by the captured wind power. The active power flow between the source (captured wind power) and the grid (load) must be balanced by actively controlling the generator speed and wind turbine pitch angle. In the study, the coordinated control of generator speed and blade pitch angle is proposed together with a dc‐link voltage controller. A model of the grid‐side converter operating as a voltage source has been built and the strategy regarding voltage and frequency regulation is presented. Simulation is carried out with different wind and load profile. The results show the wind energy can help support the weak grid and power the local grid in stand‐alone mode as well.
Yuan et al. (Sat,) studied this question.