Answers are grounded in this paper and cite their sources.
High density polyethylene (HDPE) cracking has been carried out in a thermal-catalytic two-step unit for the selective production of light olefins. Continuous pyrolysis of HDPE has been conducted in a conical spouted bed reactor at 500 °C, and the volatiles formed (mainly waxes) have been transformed in a downstream fixed bed catalytic reactor at 500 °C. The effect of catalyst acidity on product yield and composition has been studied by using three catalysts based on HZSM-5 zeolites with a SiO 2 /Al 2 O 3 ratio of 30, 80, and 280. The maximum light olefin yield (58 wt %) has been obtained using the most acidic catalyst (SiO 2 /Al 2 O 3 ratio of 30), with the individual yields of ethylene, propylene, and butenes being 9.5, 32, and 16.5 wt %, respectively. The results are a clear evidence of the higher efficiency of the two-step reaction system compared to the in situ catalytic pyrolysis (single-step), which is explained by the suitable combination of operating conditions in each one of the steps.
No takes yet. Share an insight, caveat, or question.
Artetxe et al. (2013) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: