Answers are grounded in this paper and cite their sources.
This paper presents the first co-design analysis of 28GHz broadband single-pole double-throw (SPDT) distributed travelling wave RF switches implemented in a foundry 22nm fully-depleted silicon-on-insulator (FDSOI) CMOS technology, featuring 9KV full-chip human body model (HBM) electrostatic discharge (ESD) protection. This ESD-protected millimeter wave (mmWave) SPDT switch is designed for highly reliable above-6GHz 5th-generation (5G) mobile systems, covering the n257 and n258 bands. Adverse influences of the inherent ESD-induced parasitic effects are characterized, revealing that the ESD effects can severely affect RF switch performance in mmWave bands. A new ESD-mmWave-switch co-design technique was developed to address this ESD design challenge for mmWave switches, which was validated in Si measurements, e.g., improving the switch insertion loss (IL) by 4dB for the 28GHz SPDT travelling wave switches fabricated. This design also achieves the highest reported charged device model (CDM) ESD protection of 1.84A in Si testing. This study proves that ESD-mmWave-switch co-design is critical to RF front-end designs for 5G mobile systems, which typically require robust ESD protection, but are also very sensitive to the inevitable ESD-induced parasitic effects.
No takes yet. Share an insight, caveat, or question.
Di et al. (2021) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: