Answers are grounded in this paper and cite their sources.
X-ray photoelectron spectroscopy (XPS), x-ray diffraction (XRD), and extended x-ray adsorption fine structure (EXAFS), were used for the characterization of a highly dispersedTi promoted Pt electrocatalyst.This bimetallic catalyst was prepared by addition of TiC1 4 to a methanol-water solution containing Pt on carbon black catalyst in suspension.Following filtration and air drying (300C), heat treatments up to 1200C under flowing argon were performed to promote the formation of Pt-Ti alloy phases.XPS indicated the development of a peak at 454.9 eV peak (assigned to Ti in Pt3Ti), which increased in area with heat treatment temperature.Following the 1200C heat treatment -50% of the Ti was converted to the intermetallic phase, Pt3Ti.The Pt(4f) photoelectron line shifted (+0,3 eV) to 71.2 eV following the 1200C heat treatment, the Pt(4f) binding ener~ for bulk Pt3Ti.XRO showed only fcc reflections, indicating the excess Ti present as Ti02 was x-ray amorphous.Prior to heat treatment of the Ti impregnated catalyst, the fcc reflections indicated a lattice parameter of 3.927A, identical to that for pure Pt.As heat treatment temperature increased the lattice parameter decreased to 3.906 A, the value for bulk Pt3Ti.Particle size estimates indicated a progressive increase in the crystallite size of Pt alloy phase with temperature to a final size of -150 A at 1200C.Definitive proof of an ordered Pt3Ti phase was the presence of superlattice diffraction lines from materials heated above 900C.EXAFS of these catalysts confirmed the conversion of an initial Pt-Ti0 2 mixture to Pt 3 Ti at 900-1200C heat treatment temperatures.I" ...
No takes yet. Share an insight, caveat, or question.
Beard et al. (1986) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: