Answers are grounded in this paper and cite their sources.
Investigates material and thickness stacking effects on joint strength in different alloy configurations, indicating performance improvements.
This study investigates the effects of material stacking and thickness configuration on the mechanical performance and failure modes of ultrasonic-assisted rectangular clinched joints. Experiments were conducted under fixed ultrasonic parameters of 20 kHz frequency and 7.11 µm amplitude, comparing five material stacking arrangements and two thickness configurations. The results show that positioning higher yield strength materials, such as 22MnB5 or AA6063, as the upper sheet significantly enhances joint strength. Specifically, the shear load of the joint with a 22MnB5 upper sheet and AA5052 lower sheet reaches 2.16 times that of the reverse stacking configuration, while the joint with an AA6063 upper sheet and AA5052 lower sheet exhibits a 12.7% higher shear load compared to its reverse counterpart; regarding thickness configurations, the upper-thick and lower-thin arrangement designated as 2.5U-1.5D demonstrates superior shear performance with pull-out failure, whereas the upper-thin and lower-thick arrangement designated as 1.5U-2.5D exhibits superior tensile performance characterized by interlock and bottom fracture. Fractographic analysis reveals stress-state-dependent features, with equiaxed dimples observed in tensile stress regions and U-shaped indentations in shear stress regions, both characteristic of ultrasonic-assisted ductile fracture. These findings provide direct guidance for ultrasonic-assisted rectangular clinching applications involving similar material systems and thickness scales.
No takes yet. Share an insight, caveat, or question.
Ma et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: