Answers are grounded in this paper and cite their sources.
A gullwing-structural piezoelectric energy harvester mainly consisting of two typical nonlinear buckled-bridges is proposed to effectively scavenge low-frequency rotational kinetic energy based on a gear mechanism induced interwell oscillation. A natural buckled piezoelectric unit and a flexible polymer substrate are used for the buckled-bridge. A thinned bulk lead zirconate titanate ceramic is employed for the piezoelectric layer in consideration of its excellent electromechanical factor. The presented harvester can generate a peak open-circuit voltage of 20 V at a rotational frequency of 7.8 Hz, which has a low dependence on the applied frequency. A 100 μF capacitor reaches a charging voltage of 14.7 V after 38 s and is saturated at 16.05 V for 122 s. Through the power management circuit, the harvester generates an output power of 0.4 mW and the effective power density of 6.54 μW mm−3 at the low rotational frequency. These results indicate that this strategy is promising for self-powered sensors, especially at changeable and low-frequency ambient, such as tire pressure monitoring.
No takes yet. Share an insight, caveat, or question.
Yang et al. (2019) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: