This is the authors' abstract. We don't add key points for this paper.
The edge-coupler of fiber-to-chip with ultra-low coupling loss is demonstrated on SOI platform. The edge-coupler is consisted of the cantilevered SiO 2 waveguide, the amorphous silicon (α-Si) nano taper and the crystal silicon (c-Si) nano tapers. The thin α-Si layer is deposited on the c-Si layer to improve the pattern matching with fiber. The optical input signal from the optical fiber is launched into the suspended SiO 2 waveguide, then coupled into the α-Si nano taper at the center of the SiO 2 waveguide, and finally coupled into the c-Si nano taper. We characterized the cantilevered edge-coupler using cleaved single-mode optical fiber with a mode field diameter of 10.5 μm. The measured coupling loss is as low as -1.7 dB per facet for TE mode without index matching liquid at 1550 nm. The 1 dB bandwidth is more than 100 nm with 1 dB alignment tolerances of ±2.0 μm in both horizontal and vertical directions. Besides, potential hybrid optical integration could also be allowed with this results in the future.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Ma et al. (2022) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: