Answers are grounded in this paper and cite their sources.
A method for making fused silica core-borosilicate clad optical fiber waveguides is described. The process involves the growth of a needlelike layer of borosilicate glass onto the surface of a commercially available high-purity fused silica rod by an efficient flame reaction of boron and silicon hydrides with oxygen. The needlelike layer is subsequently heat treated at relatively low temperature to form a homogeneous bubble-free glass with a smooth surface. It is then covered with a thin protective jacket of silica and drawn into a fiber. These fibers have attenuation coefficients only slightly greater than the bulk loss of the fused silica core materials. Over the Al1−xGaxAs injection laser wavelength range, 0.82–0.88 μm, the loss is 5 dB/km, while at the YAG : Nd laser wavelength, 1.06 μm, it is 3 dB/km. The process appears to be attractive for the economical manufacture of low-loss fibers due to its simplicity and high chemical conversion efficiency.
No takes yet. Share an insight, caveat, or question.
Dabby et al. (1974) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: