Answers are grounded in this paper and cite their sources.
Y-Ba-Cu-O thin films have been prepared on MgO(100) substrates by rf reactive magnetron sputtering from a single ceramic target. By adopting high total pressures, typically 280 mTorr, and relatively low substrate temperatures of approximately 650 °C, epitaxial films with the relations (001) YBa2Cu3Oy∥(001)MgO and [100]YBa2Cu3Oy∥[100]MgO can be reproducibly obtained. A high degree of epitaxy is confirmed by x-ray pole figure measurements and ion channeling. These films require a brief rapid thermal oxygen anneal at typically 850 °C, to exhibit sharp superconducting transitions with zero resistance around 75 K. Films deposited at higher temperatures above 700 °C show transitions as deposited with zero resistance near 80 K. The quality of the transition is correlated with expanded lattice constants with the best transitions occurring in films whose lattice constants approach that of the bulk. The films have high critical current densities of 1–5×106 A/cm2 at 4.2 K. They also show good uniformity and excellent surface morphology with a roughness less than 10 nm and can be readily patterned to micrometer and submicrometer dimensions.
No takes yet. Share an insight, caveat, or question.
Tanabe et al. (1989) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: