Answers are grounded in this paper and cite their sources.
The method of Zn doping for the liquid phase epitaxial growth of a high quality pn junction has been investigated. The evaporation of Zn from the growth melt was found appreciable at the growth temperature as low as 640°C and therefore causing the unwanted Zn diffusion into the substrate from the vapor. The diffusion of Zn from the growth melt was also observed and its effective diffusion coefficient in undoped was estimated to be at. 620°–640°C. The characterization of grown layers was carried out over a wide range of the Zn doping density. The distribution coefficient of Zn was determined from Hall measurement to be 0.84 below the Zn fraction in the melt of 10 −2 atomic percent. Above this fraction, it was speculated that a strong carrier compensation limits the value below and also results in the energy decrease and the half‐width increase of the photoluminescence. In order to eliminate these disadvantages of Zn doping, an improved growth method was developed by an optimized use of in situ etch. The etching of the substrate by pure In solution was found to be characterized by the apparent diffusion coefficient of P in In, at 640°C, and the structure grown by this method was found free from the misplacement of pn junction and also exhibiting the current‐voltage characteristics of a nearly abrupt junction.
No takes yet. Share an insight, caveat, or question.
Wada et al. (1980) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: