Answers are grounded in this paper and cite their sources.
The electrochemistry of Zr(IV) and Zr(II) and the electrodeposition of Al-Zr alloys were examined in the Lewis acidic 66.7-33.3 mol % aluminum chloride-1-ethyl-3-methylimidazolium chloride molten salt at 353 K. The electrochemical reduction of Zr(IV) to Zr(II) is complicated by the precipitation of however, solutions of Zr(II) can be prepared by reducing Zr(IV) with Al wire. Al-Zr alloys can be electrodeposited from plating baths containing either Zr(IV) or Zr(II), but for a given concentration and current density, baths containing Zr(IV) lead to Al-Zr alloys with the higher Zr content. This result was traced to the diminutive concentration-dependent diffusion coefficient for Zr(II). It was possible to prepare Al-Zr alloys containing up to ∼17% atomic fraction (atom %) Zr. The structure of these deposits depended on the Zr content. Alloys containing less than 5 atom % Zr could be indexed to a disordered face-centered cubic structure similar to pure Al, whereas alloys containing ∼17 atom % Zr were completely amorphous (metallic glass). The chloride pitting potentials of alloys with more than 8 atom % Zr were approximately +0.3 V relative to pure Al.
No takes yet. Share an insight, caveat, or question.
Tsuda et al. (2004) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: