Answers are grounded in this paper and cite their sources.
A microwave test structure has been designed to measure the high-speed response of giant magnetoresistive (GMR) devices. The test structure uses microwave transmission lines for both writing and sensing the devices. Pseudo-spin-valve devices, with line widths between 0.4 and 0.8 μm, were successfully switched with pulses whose full width at half-maximum was 0.5 ns. For small pulse widths τpw the switching fields are observed to increase linearly with 1/τpw. The increase in switching fields at short pulse widths is characterized by a slope which, for the current devices, varies between 4 and 16 μA s/m (50–200 Oe ns). The magnetoresistive response during rotation and switching was observed. For small rotations (∼45° between layer magnetizations) the GMR response pulses had widths of 0.46 ns, which is at the bandwidth limit of our electronics. For larger rotations (∼90°) the response pulses broadened considerably as the magnetic layers were rotated near the unstable equilibrium point perpendicular to the device axis. Full 180° switches of both soft and hard layers were observed with switching times of approximately 0.5 ns.
No takes yet. Share an insight, caveat, or question.
Russek et al. (1999) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: