Answers are grounded in this paper and cite their sources.
A new high-voltage electron beam lithography system, Nanowriter, has been designed and constructed to give a large scan field size without compromising the ability to write nanometer-scale structures. Nanowriter comprises a 100-kV LaB6 electron gun with a zoom condenser arrangement consisting of two condenser lenses which are used to provide a system demagnification of up to 10 000 times. To combine a very small on-axis spot diameter of 4 nm and a large scanned field of 250×250 μm without dynamic correction, a newly developed swinging objective immersion lens (SOIL) concept based on variable axis immersion lens (VAIL) and swinging objective lens (SOL) has been utilized. The SOIL used here has four advantages: first, it is possible to reduce the working distance, thereby decreasing spherical aberration; second, the scanned field is increased without significantly increasing deflection aberrations; third, it permits easy alignment of the column, and fourth, an inherent attribute of the SOIL is the shielding from extraneous magnetic fields given to the target. The substrate resides on an in-lens stage which is supported on the boreless lower pole piece of the SOIL. The system has been used to delineate nanometer-scale patterns in poly(methylmethacrylate) (PMMA) resist. Lines of 15-nm width have been written into 50-nm-thick PMMA on thick Si substrates. These linewidths were almost unchanged over the whole scanned area of 250×250 μm.
No takes yet. Share an insight, caveat, or question.
Chen et al. (1988) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: