Answers are grounded in this paper and cite their sources.
A prototype ion-conductive polymer actuator, which enables to displace its tip largely and respond to the commands quickly, was developed. We examined its characteristic utility to confirm the actuator clinically-applicable in practical catheters. The repetitive adsorption-reduction process using gold phenanthroline complex and sodium sulfate solutions was conducted on perfluorocarbon sulfonic acid membranes, which can lead to the uniform gold loading inside the membranes. The displacement length of the tip by bending the actuator was increased in proportion to the applied voltage, indicating that ions inside the processed gold-membrane electrolyte could transfer according to the ion-conductive principle. The tip of the actuator showed the maximum displacement of 7mm with a fast response time under the electric load conditions of 1.8V-120mA. When using the actuator under water, no air bubble derived from the water electrolysis was observed up to the 1.8V applied voltage. Electron microscope findings across the processed electrolyte suggest that large bending displacements might depend on the uniformity of the electrically activated points under the surface of the membranes.
No takes yet. Share an insight, caveat, or question.
Mizuno et al. (2016) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: