Answers are grounded in this paper and cite their sources.
A new electrode configuration for thermionic energy converters (TECs), where both electrodes are single crystals of the same refractory metal, is investigated. Such a design solves the problem of cathode material evaporation and deposition on the anode at high operating temperatures, thereby extending the TECs operational lifetime for use in nuclear and future thermonuclear reactors. A modified thermonuclear reactor shielding structure integrating the TEC is also proposed. Using full-current spectroscopy and contact potential difference measurements, the dependences of the slow-electron reflection coefficient and the electron work function on caesium adsorption were examined for the (100) and (110) faces of molybdenum and tungsten single crystals. The work function was found to vary non-monotonically with increasing surface coverage with Cs: it has a minimum before reaching saturation. By controlling the cathode and anode temperatures, and hence the Cs concentrations on their surfaces, the optimal difference in work function values between emitter and collector can be achieved while minimizing electron reflection from the anode. The most efficient configuration employs the W(110) face for both electrodes. When covered with caesium, this surface exhibits the lowest work function (1.39 eV) and a small reflection coefficient (∼0.24), both favourable for the collector. In its initial (without Cs) atomically pure state, the W(110) face shows the highest work function (5.32 eV), consistent with the strongest Cs binding energy, which ensures good Cs retention and high ionization efficiency at elevated temperatures on emitter.
No takes yet. Share an insight, caveat, or question.
Galstian et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: