Answers are grounded in this paper and cite their sources.
For the first time, a flower-like tin oxide (SnO₂) nanosheet was integrated onto a tailored zinc oxide (ZnO) nanosheet array, creating SnO₂/ZnO heterostructure films on a Fluorine Tin Oxide (FTO) substrate via a hydrothermal method. A hole-collecting layer of Poly(3,4-ethylenedioxythiophene): poly(styrenesulfonate) PEDOT:PSS was spin-coated onto the SnO₂ layer, forming a PEDOT:PSS/SnO₂/ZnO double heterostructure. The crystallite sizes of SnO₂ (S-sensor), ZnO (Z-sensor), and SnO₂/ZnO (S/Z-sensor) were measured at 4.08 nm, 20.60 nm, and 22.25 nm, respectively. Structural, morphological, optical, and electrical properties were analyzed using X-Ray Diffraction (XRD), Field Emission Scanning Electron Microscopy (FESEM), Ultraviolet–Visible (UV–Vis) Spectroscopy (UV), and photoconductivity studies. The heterostructure formation was confirmed, with a dominant peak at the 101 plane. The bandgap, photoconductivity, and impedance reduction were determined to be 2.36 eV (Electron Volt), 0.45 V (Volt), and 1.51 kΩ, respectively. Humidity sensing experiments at room temperature revealed that the SnO₂/ZnO heterostructure exhibited superior performance, with a sensitivity of 90.8%. The S/Z sensor demonstrated a broad relative humidity (RH) detection range (10–97% RH), low hysteresis (7.1%), fast response (3 seconds), and quick recovery (12 seconds). Additionally, the sensor maintained stability over seven humidity measurement cycles. These findings highlight the potential of the PEDOT: PSS/SnO₂/ZnO double heterostructure for advanced humidity sensing applications.
No takes yet. Share an insight, caveat, or question.
Chellamuthu et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: