Answers are grounded in this paper and cite their sources.
Purpose. The relevance of the article is determined by the need to ensure fire safety at facilities under protection operating electrical networks with voltages up to 1 000 V, which are characterized by significant load imbalance, as well as by the annual increase in the number of electrical receivers with nonlinear volt–ampere characteristics. It is noted that existing solutions for each of these problems separately—load symmetrizing and compensation for higher harmonic components—do not make it possible to maintain the required level of safety. Methods. Using the Matlab software package, simulation modeling was carried out to assess the influence of asymmetry and higher harmonic components on the current magnitude in the neutral conductor of three-phase low-voltage networks. Findings. In symmetrical modes with harmonic components, as well as in asymmetrical modes without higher harmonics, the current in the neutral conductor is comparable to the phase current and, in some cases, exceeds it. The combined effect of nonsinusoidality and asymmetry leads to a further increase in the neutral conductor current. At the same time, no deviations of voltage parameters from permissible regulatory values are observed for any of the considered cases, meaning that problem areas in ensuring fire safety remain unnoticed. Research application field. The findings should be incorporated into research and development projects of scientific organizations of EMERCOM of Russia and other ministries and agencies involved in improving fire safety systems for electrical installations. Conclusions. Factors of asymmetrical and nonsinusoidal modes must be considered comprehensively, since only their combined assessment allows ensuring the fire safety of electrical installations.
No takes yet. Share an insight, caveat, or question.
KOZLOVA et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: