Why the study?
Existing continuous BP measurement techniques are often highly complex and expensive or suffer from inaccuracies.
Does a wearable device using low-frequency vascular unloading accurately track mean arterial pressure compared to a reference device in human subjects?
Does a wearable device using low-frequency vascular unloading accurately track mean arterial pressure compared to a reference device in human subjects?
A novel, low-cost wearable device using low-frequency vascular unloading accurately tracks continuous blood pressure compared to traditional techniques.
Answers are grounded in this paper and cite their sources.
May simplify continuous BP monitoring; leaves open prospective validation before clinical use.
Objective: Continuous blood pressure (BP) monitoring gives a better understanding of a person’s cardiovascular health status than single BP measurements. The existing measurement techniques are often highly complex and expensive, or suffer from inaccuracies. We propose a simple yet effective technique for continuous blood pressure monitoring.Methods: Our method is based on the finding that the non-pulsatile (DC) component of the photoplethysmograph (PPG) correlates with blood pressure. By keeping the infrared PPG DC component constant by altering the applied external pressure using a feedback mechanism the BP can be measured continuously. This way the pressure read from the pressure sensor follows the mean intra-arterial BP. We call this low-frequency vascular unloading. We propose a method for assessing the measurement error introduced by changes in vasomotor tone. Green PPG was used for the vasomotor compensation method. We packaged the technology to a wearable finger-worn device similar to a pulse oximeter probe.Results: We measured over 90 minutes of continuous BP data from total of 7 subjects. The subjects were asked to perform different BP altering maneuvers during the measurement. The ability to track BP changes was verified by continuous mean arterial pressure (MAP) readings measured with the reference device (CNSystems CNAP 500) and our device, resulting in correlation ofr= 0.894 and ((mean±SD) mmHg) of (0.3±4.3) mmHg for mean arterial pressure. Without vasomotor tone compensation the results were with slightly less accurate:r= 0.83, (-1.4±5.1) mmHg.Conclusion: The proposed technology performed well compared to traditional vascular unloading technique while requiring significantly less complex control logic and no fast-switching pneumatics.Significance: The proposed technique is simple, yet effective, low-cost solution and it can be constructed from off-the-shelf components and miniaturized into a wearable form factor. The technique has potential in the field of health wearables and remote continuous BP monitoring for personalized health applications.
No takes yet. Share an insight, caveat, or question.
Panula et al. (2023) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: