This is the authors' abstract. We don't add key points for this paper.
This study explores through transmission laser welding of dissimilar, optically transparent polymers, acrylic and polycarbonates using a novel hybrid approach that integrates Response Surface Methodology (RSM) and Finite Element Method (FEM). Quantitative analysis involved a 3 factor, 3 level central composite design with process inputs of laser power, frequency and scanning speed. The resulting weld qualities, such as weld width, Heat Affected Zone (HAZ), ware measured, showing weld width ranges from 112.65 μm to 302.64 μm and HAZ between 20.85 μm to 105 μm. The thermal modelling provided predictions for depth of penetration, with values spanning from 106.25 μm to 228.65 μm. validated against experimental data, demonstrating an average error of 8.09%. Qualitatively, the investigation indicatees that laser power and scanning speed substantially effect the weld quality, with higher power leading to broader weld widths and greater HAZ. The FEM simulations confirmed these trends and provided insights into temperature distributions. The investigation contributes to the existing knowledge pool that would be beneficial to the academia and industries.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Kumar et al. (2024) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: