Answers are grounded in this paper and cite their sources.
This paper describes techniques suitable for the fabrication of silicon field effect transistor (FET) circuits with gate lengths as small as 0.07 μm, intended for experiments to assess the feasibility of FET technology in the 0.1-μm channel length regime. High-resolution electron-beam lithography using a vector scan system capable of an 8-nm Gaussian spot size has been performed successfully for all levels, with various resist systems tailored to the specific processing requirements. Proximity correction has been found to be a critical issue and was performed using parameters derived from measured point exposure distributions. Metal liftoff using double-layer poly(methyl methacrylate) resist has been performed successfully with complex patterns. Better than 0.1-μm linewidth and 0.05-μm alignment accuracy is achieved over a 250-μm field, using tantalum silicide alignment marks.
No takes yet. Share an insight, caveat, or question.
Rishton et al. (1988) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: