Answers are grounded in this paper and cite their sources.
A series of cast Al – Cu – Mg – Ag based alloys with minor cerium additions have been investigated using optical microscopy, scanning electron microscopy, energy dispersive X-ray spectroscopy and transmission electron microscopy. It was found that increasing the cerium content from 0 to 0.45 wt-% increased the tensile strength at the test temperatures of 25°C and 300°C. The high strength of the casting alloys with cerium is attributed to the refined grains and the high density of fine ω precipitates. However, the addition of 0.2 wt-%Ce to the alloy with 0.25 wt-%Ti induced a detrimental effect on the mechanical properties. The cause of this was found to be the formation of the intermetallic compound Alx Ti6 Ce3 Cu.
No takes yet. Share an insight, caveat, or question.
Xiao et al. (2004) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: