Answers are grounded in this paper and cite their sources.
A synthetic protocol was developed for the preparation of thin mesoporous films with enhanced thermal stability. This objective was achieved by a modification of the procedure of supramolecular templating by a Pluronic P-123 copolymer by an addition of a small amount of phosphoric acid to the precursor solution. Thin mesoporous films up to thick were prepared via layer-by-layer deposition. The roughness factor exceeding 1300 was achieved on these films. After annealing at , well-developed 5–6 nm anatase nanocrystals were present in the pore walls of a still perfect mesoporous structure. The pore coalescence and structure collapse during heat-treatment were effectively hindered by the presence of phosphorus. Our P-modified mesoporous films were sensitized with the N-945 dye and used as photoanodes of the dye-sensitized solar cells. They reached the conversion efficiency of 5.03 or 5.05% for the film thickness of 1.8 or , respectively. Whereas the roughness factor scaled linearly with the number of layers, the solar conversion efficiency reached a constant value for films consisting of eight or more layers.
No takes yet. Share an insight, caveat, or question.
Zukalová et al. (2009) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: