Answers are grounded in this paper and cite their sources.
Modeling study demonstrates improved voltage gain in line tunneling FET circuits via gate–source overlap tuning, suggesting superior analog performance over standard width scaling.
The gate–source overlap length (L_OV) in the line tunneling FET (L-TFET) can be used as a design parameter to improve the analog circuit performance. In this paper, we investigate the drain current (ID) dependence onL_OV, considering the electrostatics of the gate–source overlap region. It is observed thatIDincreases withL_OVexhibiting a nonlinear behavior. This happens as the impact of the lateral electric field at the far end of the tunnel junction reduces, thereby reducing the tunneling rate. Based on our semiempirical physicalID–L_OVmodel, a novelL_OVvariation-aware small signal model for L-TFET is also proposed. The output resistance and the gate–drain capacitance remain almost independent ofL_OVin the saturation regime. The gate–source capacitance and the transconductance linearly increase withL_OV. A common source amplifier is demonstrated with ~2.4 times increase in the voltage gain whenL_OVis increased from 20 to 50 nm, with a penalty of ~10% in the bandwidth. We observe that it is not possible to achieve the gain similar to one obtained using 2.5 times increase inL_OVeven after increasing the device width five times. However, the bandwidth reduces 30% at such width owing to an increase in the gate capacitances.
No takes yet. Share an insight, caveat, or question.
Acharya et al. (2019) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: