Answers are grounded in this paper and cite their sources.
High Resolution Image Download MS PowerPoint Slide To assess the performance of an adsorbent for a particular gas separation, and for process design, it is necessary to determine multicomponent gas adsorption equilibria, either experimentally or from predictions based on models or theory. The experimental techniques commonly used for this purpose, however, are time-consuming and typically require large samples. In this article, we describe a new approach, called the Integral Mass Balance (IMB) method, which combines the controlled flow of a gas mixture with in situ gravimetric measurement and gas composition analysis using quadrupole mass spectrometry. The IMB method allows very rapid equilibrium multicomponent gas adsorption measurements to be performed on samples weighing only a few grams. The method is demonstrated and validated by performing binary O 2 /N 2 adsorption measurements on a commercial 5A zeolite, at ambient temperature and a total pressure of 0.915 MPa. Excellent agreement with previously published data was found, using a 3.5 g sample, with a measurement time of only 4 h for a 20 point isotherm. In contrast, other techniques of equivalent accuracy would require around 20 days of experimental effort to collect a comparable amount of data. Selectivities were also calculated and shown to agree with previously published results. In principle, the technique could readily be extended to measure gas adsorption from ternary or higher mixtures.
No takes yet. Share an insight, caveat, or question.
Broom et al. (2020) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: