This is the authors' abstract. We don't add key points for this paper.
Hard magnetic (Sm,Zr)(Co,Fe,Cu)z alloys intended for application as powder fillers in bonded magnets are considered. The microstructure and intrinsic coercive force of Sm0.87Zr0.13(Co0.702Cu0.088Fe0.210)6.7, Sm0.81Zr0.19(Co0.702Cu0.088Fe0.210)6.3, and Sm0.85Zr0.15(Co0.690Cu0.070Fe0.240)6.8 alloys, the structural and magnetic states of which are formed at different aging temperatures and cooling rates, are studied. A high coercive force and adequate squareness of the magnetic hysteresis loop of the alloy powders under study are observed at grain and subgrain sizes of the 2 : 17 phase of 10–20 μm. It is shown that the anisotropic powders of the Sm0.87Zr0.13(Co0.702Cu0.088Fe0.210)6.7 alloy can be prepared for manufacturing bonded magnets with a coercive force of 14–20 kOe or higher, which are intended for application in electric machines.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Kolchugina et al. (2023) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: