Answers are grounded in this paper and cite their sources.
A new configuration for planar inverted-F antenna (PIFA) is being reported, where the patch length can be reduced to ≤ λ/13 by conceiving a vertical capacitive wall near the open edge of the PIFA, separated by an air-gap. Two designs have been investigated, (a) Antenna-1: basic PIFA with a vertical capacitive wall, and (b) Antenna-2: basic PIFA with the vertical capacitive wall and edge-slots. The capacitive gap controls the resonance frequency and size reduction. Few edge slots parallel to the shorted wall also cause additional size reduction. The vertical wall also prevents the beam-tilt from the bore-sight and results in improved pattern symmetry in presence of a small ground plane. Theoretical analyses based on simple transmission-line models are presented for both the designs. Experimental verifications were carried using fabricated prototypes of each of the designs. The ground plane is marginally extended beyond the patch dimensions requiring a real estate of λ/10.5 × λ/10.5 × λ/76.5. These miniaturized linearly polarized (LP) antennas yield quasi omni-directional radiation patterns. The achieved size reduction and performances are improved compared to the earlier investigations.
No takes yet. Share an insight, caveat, or question.
Chakrabarti et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: