This is the authors' abstract. We don't add key points for this paper.
The low earth orbit (LEO) satellites equipped with millimeter wave (mmWave) communication systems offer advantages such as low transmission delay and abundant frequency resources, making them pivotal in non-terrestrial networks (NTN) deployment. However, the utilization of massive multiple-input multiple-out (MIMO) systems coupled with the rapid movement of LEO satellites poses challenges to time-varying channel estimation, notably in pilot overhead and computational complexity. To address these challenges, we propose a two-stage channel estimation algorithm with beam scanning assisted long-term angle estimation and short-term path gain estimation in this paper. Specifically, a long period consisting of multiple short periods for channel estimation is defined based on the characteristics of slow path angle change and fast path gain change in satellite channels. Within the long period, we first limit the candidate beam space based on the results of beam scanning, selecting beams with high received signal strength to reduce the dimensionality of the sensing matrix, thereby reducing the computational complexity of subsequent channel estimation. Then, the parallel interference cancellation assisted multi-grid matching pursuit (PIC-MGMP) algorithm is used for channel estimation to eliminate the off-grid effects and improve estimation accuracy. In the short period, the path gain is estimated according to the estimated angle with less pilot overhead, facilitating prompt updates of channel parameters, thereby reducing pilot overhead. The simulation results demonstrate that the proposed scheme reduces the computational complexity by about 60% and pilot overhead by about 50%, while maintaining comparable channel estimation accuracy.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Liu et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: