This is the authors' abstract. We don't add key points for this paper.
In the present work, polymer-ceramic composite filaments with 70%–75%wt load of NMC622 and NMC622/carbon black (CB) have been developed to produce high-voltage electrodes for Li-ion battery applications via fused filament fabrication (FFF) 3D printing. In the search for higher capacities, binder-free electrodes were obtained after thermal treatments to eliminate the organic polymer and produce ceramics with a certain level of mechanical strength (800 °C for 6 h in air). NMC622 decomposes under non-oxidizing atmospheres at low temperatures, whilst oxidizing conditions would prevent the use of carbon-based additives to improve the electronic conductivity of the electrodes. Therefore, an alternative strategy that considers partial debinding at moderate temperatures (≈300 °C) was also proposed. Both strategies led to the production of electrodes exhibiting electrochemical performances close to those of conventionally processed NMC622-based cathodes. 3D printed full ceramic (binder free) NMC622 electrodes yielded reversible capacities of up to 147 mAh g at C/10, i.e. 89% capacity retention, although the performance was significantly lower at higher rates (i.e. C/2). On the other hand, the partially debinded NMC622 electrodes containing 10%wt of CB performed extended cycling runs with up to ≈130 mAh g and CE ≈99% at C/10 and also rather competitive values up to C/2 (≈70 mAh g after 500 cycles). Furthermore, the CB preservation was crucial under more demanding conditions to perform adequately up to 2 C, recovering the starting capacity at C/10. Therefore, these results demonstrate that NMC-based electrodes can be fabricated using FFF-3D printing technologies after applying optimized strategies for debinding and sintering.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Ramos-Fajardo et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: