Answers are grounded in this paper and cite their sources.
Examines deformation and failure mechanisms in dissimilar welded joints under biaxial loading, indicating critical performance insights.
Dissimilar welded joints, typically composed of low-carbon steel and stainless steel, are widely used in large gas transport structures. Due to these material combinations, such joints may undergo isotropic deformation and exhibit specific fracture performance. Therefore, it is important to examine the deformation and failure mechanisms of these materials, including elastic deformation under biaxial loading. In this study, we developed a new biaxial tensile testing specimen made of an SS-MS dissimilar welded joint to evaluate its deformation behaviour under biaxial tension and to understand the failure mechanisms through microstructural analysis. First, an analytical model was developed in ANSYS software and simulated under given boundary conditions. Subsequently, biaxial tensile tests were conducted to investigate changes in Young’s modulus and yield strength for different tensile directions. These tests showed that the materials experienced isotropic deformation. The experimental and analytical results were compared, showing very good agreement between the finite element (FE) model and the experimental results. Next, we investigated the dynamic failure response of the dissimilar welded joint under biaxial loading using the Newmark beta method. Analysing the dynamic failure response of dissimilar welded joints under biaxial loading over long durations is typically challenging; however, the Newmark beta method was successfully applied to the dissimilar welded joint under multiaxial loading. Finally, we investigated the fracture surface mechanisms of the dissimilar welded joint microstructure using SEM and EBSD observations.
No takes yet. Share an insight, caveat, or question.
A 2026 study studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: