Answers are grounded in this paper and cite their sources.
In this paper we present an investigation of sodium contamination of SiO 2 (oxide) during anodic bonding. Sodium contamination can be deleterious to the electrical properties of silicon structures. Silicon wafers with metal–oxide semiconductor (MOS) capacitors were bonded to Corning 7740 (Pyrex) glass wafers. The concentration of mobile ions was measured on capacitors outside and within glass cavities using the triangular voltage sweep method. Using secondary ion mass spectrometry analysis, it was confirmed that the ions were sodium. We found an increase in sodium concentration N m between 10 10 and 10 13 cm −2 , depending on the oxide location and the geometry of the glass cavity. The gate aluminium of the MOS capacitor was found to partly shield the oxide from contamination, causing a two to five times smaller increase in N m . Reducing the bonding voltage from 800 to 500 V did not affect the increase in N m significantly. In contrast, changing the ambient in the bonding chamber from vacuum to 1020 mbar air, reduced the contamination of capacitors situated outside the glass. A plasma-enhanced chemical vapour deposited Si 3 N 4 film was found to be very beneficial in protecting the capacitors. The Si 3 N 4 prevented sodium contamination of the capacitors situated within the glass cavities, and radically reduced the contamination of the capacitors situated outside the glass. The results suggest that the contaminating sodium originated from the bulk glass.
No takes yet. Share an insight, caveat, or question.
lberg-Henriksen et al. (2003) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: